Fujitsu ETERNUS AF Series Podręcznik konfiguracji - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Przechowywanie Fujitsu ETERNUS AF Series. Fujitsu ETERNUS AF Series 16 stron. Hybrid storage systems, all-flash arrays, power synchronized unit
Również dla Fujitsu ETERNUS AF Series: Podręcznik konfiguracji (38 strony), Środki ostrożności (12 strony)
Drukuj stronę
Chapter 2
Setting Up the ETERNUS DX/AF
2.1
Common Settings
2.1.3
Setting the Host Responses
The host response parameters for the ETERNUS DX/AF must be set to match the way the server processes the
responses to requests from the ETERNUS DX/AF. Setting of the host response must be done before connecting
the ETERNUS DX/AF to the server.
Set the parameters that are described below for each OS.
Retain the default values for all of the parameters that are not described below.
When setting the access path using the ETERNUS SF Storage Cruiser, the host responses for FC host will be
set to default values. Set the host responses after setting the access path using the ETERNUS SF Storage
Cruiser.
Table 2.5 Host response settings
OS
Solaris (*1)
®
Windows
Linux
VMware ESX
Citrix XenServer
Oracle VM Server for x86
HP-UX
AIX
IBM SVC
*1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards.
To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora-
cle-brand Driver" sections in "Configuration Guide -Server Connection- (Fibre Channel) for Oracle So-
laris".
Conditions
When using PRIMECLUSTER (regardless of the
multipath software type)
When using the OS standard Multipath Driver
(MPxIO)
Other cases
–
–
When using Veritas InfoScale
Other cases
–
10
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
Host response selection
Default
Solaris MPxIO
Default
Default
HP-UX
AIX VxVM
AIX
SVC
P3AM-7962-15ENZ0