Fujitsu ETERNUS DX Disk Podręcznik konfiguracji - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Przechowywanie Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 stron. Server connection, fcoe for linux driver settings for converged network adapter cards
Również dla Fujitsu ETERNUS DX Disk: Podręcznik użytkownika (35 strony), Podręcznik użytkownika (42 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (44 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (29 strony), Podręcznik konfiguracji (25 strony), Podręcznik konfiguracji (32 strony), Podręcznik konfiguracji (35 strony), Podręcznik konfiguracji (43 strony), Podręcznik konfiguracji (21 strony), Podręcznik konfiguracji (24 strony)

Drukuj stronę

Fujitsu ETERNUS DX Disk Podręcznik konfiguracji

Chapter 3

Notes

3.10

Notes about Connections with a Windows Server

3.10

Notes about Connections with a Windows Server

When Windows Server

after a firmware is applied to the ETERNUS DX S4/S3 series, the status of the disks on Windows Server

become offline.

The status of the disks on Windows Server

Click the [Start] button, select [Computer Management] under [Administrative Tools] and then select [Man-

age Discs] (or [Disk Management]) in the left pane.

Note that the occurrence condition and the workaround differ depending on the path configuration of Win-

dows Server

For single-path configurations, change the SAN Policy setting before a firmware is applied to prevent the disk

from becoming offline after the firmware is applied.

For multi-path configurations, there is no workaround. The procedure in

occurs" (page 15)

■

Single-path configuration

The offline status can be avoided only when updating the firmware by changing the SAN Policy setting to

"Online All".

If operations are possible with the SAN Policy setting set to "Online All",

preventing occurrences" (page 13)

●

Checking the SAN Policy setting

The following shows how to check the SAN Policy setting.

Execute the "diskpart" command in the command prompt.

The prompt changes to DISKPART.

Enter "san" and press the [Enter] key.

DISKPART> san

One of the following SAN Policies appears.

•

"Offline Shared"

•

"Offline All"

"Online All"

•

Enter "exit" and press the [Enter] key to complete the "diskpart" command.

and the ETERNUS DX S4/S3 series are connected and Windows Server

can be checked with the following procedure.

must be performed to recover from the offline status.

is not required.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows

"● Measure to take after a problem

Step 4

is rebooted

may

"● Method for proactively

P3AM-3442-18ENZ0