Fujitsu Eternus DX200F Instrukcja konfiguracji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Przechowywanie Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 10 stron. Hybrid storage systems, all-flash arrays, power synchronized unit
Również dla Fujitsu Eternus DX200F: Instrukcja obsługi (48 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (13 strony), Podręcznik konfiguracji (16 strony), Podręcznik konfiguracji (38 strony), Środki ostrożności (12 strony)

Host affinity creation

Create an association between a host group and a port

group and an association between a host group and a

LUN group.

To display the screen to create a host affinity:

Click [Create Host Affinity] in [Action] on the

[Connectivity] tab.

Monitoring Setup

STEP

Perform the ETERNUS DX monitoring setup if required.

●

Notification of the ETERNUS DX problems as they occur is possible if the event notification method and level

have been set.

●

If remote support is required, the ETERNUS DX needs to be set to notify the remote support center of failures.

Remote support allows prompt detection and resolution of trouble.

Point

Configuration Guide (Basic)

STEP

Perform the settings required to connect to the server and install the required drivers. Perform the settings required

for network devices connecting the server and the ETERNUS DX.

After the server connection setup, confirm that the volumes in the ETERNUS DX can be recognized by the server.

All necessary settings are complete, and the ETERNUS DX is now ready for normal operation.

Configuration Guide (Basic)

•

Configuration Guide -Server Connection-

•

FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide

P3AM-8482-01ENZ0