Fujitsu ETERNUS DX8700 S2 Podręcznik użytkownika - Strona 27
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przechowywanie Fujitsu ETERNUS DX8700 S2. Fujitsu ETERNUS DX8700 S2 42 stron. Disk storage system settings
Również dla Fujitsu ETERNUS DX8700 S2: Podręcznik użytkownika (35 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (15 strony)
Drukuj stronę
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
6.1.6
Checking the LUNs
The following procedure describes how to check LUN recognition using the vSphere Client.
Log in to the VMware ESX from the vSphere Client, and then check whether the ETERNUS DX Disk storage
system LUNs are recognized.
The procedure is as follows:
1
Use the vSphere Client to log in to VMware ESX as "root".
2
Select the [Configuration] tab.
3
Select [Storage Adapters] from the [Hardware] list.
4
Select [Rescan...].
After selecting [Rescan...], the VMware ESX should attempt to recognize the ETERNUS DX Disk stor-
age systems' LUNs again.
5
If the iSCSI Software Adapter (vmhba34 in this example) is selected from the [Storage Adapters] area,
the recognized devices will be shown in the [Details] area, as follows.
6
Check the [Path Selection] for all the LUNs in the ETERNUS DX Disk storage system.
When the VMware ESX server recognizes the LUNs, the active path for each LUN is automatically set. In
this case, [Path Selection] is set to [Most Recently Used (VMware)].
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
27
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0