Fujitsu ETERNUS2000 200 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Przechowywanie Fujitsu ETERNUS2000 200. Fujitsu ETERNUS2000 200 21 stron. Disk storage systems (fibre channel) for oracle solaris
Również dla Fujitsu ETERNUS2000 200: Podręcznik (28 strony), Instrukcja połączenia z serwerem (25 strony), Instrukcja połączenia z serwerem (32 strony), Instrukcja konfiguracji (4 strony), Instrukcja połączenia (19 strony), Korzystanie z produktów opcjonalnych (2 strony)

Fujitsu ETERNUS2000 200 Podręcznik
Chapter 3 Setting Up MPxIO
>
3.1 Solaris 10 OS
3.1.4

Editing the "/kernel/drv/scsi_vhci.conf" Settings

Edit the "/kernel/drv/scsi_vhci.conf" file to enable the auto-failback function.
Check that an "auto-failback="enable";" line exists, enabling the auto-failback function.
Otherwise, add this line or change its value to "enable".
# Copyright 2004 Sun Microsystems, Inc.
All rights reserved.
# Use is subject to license terms.
#
#pragma ident
#
name="scsi_vhci" class="root";
#
# Load balancing global configuration: setting load-balance="none" will cause
# all I/O to a given device (which supports multipath I/O) to occur via one
# path.
# to be used in turn.
#
load-balance="round-robin";
#
# Automatic failback configuration
# possible values are auto-failback="enable" or auto-failback="disable"
auto-failback="enable";
#
# For enabling MPxIO support for 3rd party symmetric device need an
# entry similar to following in this file. Just replace the "SUN
# part with the Vendor ID/Product ID for the device, exactly as reported by
# Inquiry cmd.
#
# device-type-scsi-options-list =
# "SUN
#
# symmetric-option = 0x1000000;
3.1.5

Reconfiguring and Restarting the Server

Reconfigure and reboot the server to effect the new settings.
The ETERNUS Disk storage system can be reconfigured by creating the "/reconfigure" file and
rebooting the server.
# touch /reconfigure
# /usr/sbin/shutdown -y -g0 -i6
P3AM-2722-04ENZ0
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
"@(#)scsi_vhci.conf
Setting load-balance="round-robin" will cause each path to the device
Check that auto-failback is enabled.
SENA", "symmetric-option";
10
1.9
04/08/26 SMI"
SENA"
Copyright 2010 FUJITSU LIMITED