Fujitsu ETERNUS4000 model 300 Instrukcja połączenia z serwerem - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja połączenia z serwerem dla Przechowywanie Fujitsu ETERNUS4000 model 300. Fujitsu ETERNUS4000 model 300 32 stron. Disk storage systems (fibre channel) for oracle solaris
Również dla Fujitsu ETERNUS4000 model 300: Podręcznik (28 strony), Instrukcja połączenia z serwerem (25 strony), Instrukcja połączenia (19 strony)
Drukuj stronę
Chapter 10 Checking the Connected Devices
10.1
Turning on the Devices
To turn on the connected devices, use the following procedures:
1
2
3
4
5
10.2
Checking the LUNs
Check the LUNs using the following procedures.
1
2
P3AM-2922-05ENZ0
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Procedure
Turn on the Fibre Channel switch power (if used).
Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.
Turn on the ETERNUS Disk storage system.
Check that the Ready LED is lit on the ETERNUS Disk storage system.
Turn on the server.
Procedure
Open [Device Manager] to show [Disk drives].
If the ETERNUS Disk storage systems' LUNs are recognized by the server, the
ETERNUS Disk storage systems' device (LUNs) are displayed under [Disk
drives].
27
End of procedure
End of procedure
Copyright 2010 FUJITSU LIMITED