Fujitsu ETERNUS8000 800 Podręcznik - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik dla Przechowywanie Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 21 stron. Disk storage systems (fibre channel) for oracle solaris
Również dla Fujitsu ETERNUS8000 800: Podręcznik (28 strony), Instrukcja połączenia z serwerem (25 strony), Instrukcja połączenia z serwerem (32 strony), Instrukcja połączenia (19 strony)

Chapter 3 Setting Up MPxIO

3.2 Solaris 9 OS

3.2.2

Checking the Storage System Status

Use the "format" command to check the path status before multipathing is set up (example out-

put follows).

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>

/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0113ce2e1,0

1. c2t2051000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@1,1/fp@0,0/ssd@w2051000b5d6a0109,0

2. c3t2050000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@2,1/fp@0,0/ssd@w2050000b5d6a0109,0

3.2.3

Edit the "/kernel/drv/scsi_vhci.conf" file.

Procedure

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Enable MPxIO.

Check that an "mpxio-disable="no";" line exists, enabling MPxIO.

Otherwise, add this line or change its value to "no".

Enable the auto-failback function.

Check that an "auto-failback="enable";" line exists, enabling the auto-failback function.

Otherwise, add this line or change its value to "enable".

"d0" device is connected to c2 and c3 paths.