Fujitsu ETERNUS8000 900 Instrukcja połączenia z serwerem - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja połączenia z serwerem dla Przechowywanie Fujitsu ETERNUS8000 900. Fujitsu ETERNUS8000 900 25 stron. Disk storage systems (fibre channel) for oracle solaris
Również dla Fujitsu ETERNUS8000 900: Podręcznik (28 strony), Podręcznik (21 strony), Instrukcja połączenia z serwerem (32 strony), Instrukcja połączenia (19 strony)
Drukuj stronę
Chapter 9
Set up and check the device-mapper multipath.
9.1
Editing "/etc/multipath.conf"
Edit the device-mapper multipath configuration file as follows.
1
2
P3AM-4152-02ENZ0
ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux
(SUSE Linux Enterprise Server)
Setting Up and Checking the device-
mapper multipath
Procedure
Copy the "/usr/share/doc/packages/multipath-tools/multipath.conf.synthetic" file
to "/etc".
# cp /usr/share/doc/packages/multipath-tools/multipath.conf.synthetic
/etc/multipath.conf
Add the following lines to the file.
Add the following lines at the end of the "defaults" section.
defaults{
user_friendly_names yes
}
Add the following lines at the end of the "devices" section.
(This example is for the ETERNUS2000)
•
For SLES11
devices {
device {
vendor
product
prio
path_grouping_policy
path_selector
failback
no_path_retry
}
}
"FUJITSU"
"E2000"
alua
group_by_prio
"round-robin 0"
immediate
10
21
Copyright 2010 FUJITSU LIMITED