Fujitsu ETERNUS8000 model 1200 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Przechowywanie Fujitsu ETERNUS8000 model 1200. Fujitsu ETERNUS8000 model 1200 21 stron. Disk storage systems (fibre channel) for oracle solaris
Również dla Fujitsu ETERNUS8000 model 1200: Podręcznik (28 strony), Instrukcja połączenia z serwerem (25 strony), Instrukcja połączenia z serwerem (32 strony), Instrukcja połączenia (19 strony)

Chapter 3 Setting Up MPxIO

3.1 Solaris 10 OS

3.1.2

Enabling MPxIO

Enable MPxIO.

Enable MPxIO by adding the following line to the "/kernel/drv/fp.conf" file.

mpxio-disable="no";

# Global mpxio-disable property:

# To globally enable MPxIO on all fp ports set:

# mpxio-disable="no";

# To globally disable MPxIO on all fp ports set:

# mpxio-disable="yes";

mpxio-disable="no";

3.1.3

Use the "format" command to check the path status before multipathing is set up (example

output follows).

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>

/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0113ce2e1,0

1. c2t2051000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@1,1/fp@0,0/ssd@w2051000b5d6a0109,0

2. c3t2050000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@2,1/fp@0,0/ssd@w2050000b5d6a0109,0

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Example:

name="fp" parent="/pci@8,600000/SUNW,qlc@2" port=0 mpxio-disable="yes";

<- Comment out this line

<- Add this line

"d0" device is connected to c2 and c3 paths.

End of procedure