Fujitsu LTO-5 Podręcznik użytkownika - Strona 31
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przechowywanie Fujitsu LTO-5. Fujitsu LTO-5 34 stron. Fujitsu lto-5 half-height sas tape drive
Drukuj stronę
6.2.1
Encryption LED
The encryption LED may be blue or amber, as described in the following table.
The state of the other LEDs depends upon the activity, as described below.
Encryption LED
(Blue or Amber)
On
Off
Off with Ready flashing
green
On (solid blue)
On (solid blue) with Ready
flashing green
Alternate flashing, blue and
amber
Table 4: Encryption LED
NOTE:
The Encryption LED only functions if you are using backup software that
supports hardware encryption and this feature is enabled in the backup
application. See the software manual for the backup application.
Encryption troubleshooting
●
Ensure that you are using an LTO-5 tape drive and LTO Ultrium 5 or LTO
Ultrium 4 media.
●
Ensure that your software supports hardware encryption. It may be
necessary to update the software. Consult your software vendor for more
information.
Ensure that the correct key or pass phrase has been entered.
●
LTO-5 Half-Height SAS Tape Drives
Understanding LED sequences
State
At power on
The drive is idle and there is no encryption key.
The tape drive is reading/writing unencrypted
data from another host or unloading a
cartridge.
The drive is idle but the encryption key is
loaded. The drive is ready to read/write
encrypted data.
The drive is reading/writing encrypted data.
There is an encryption related error. This is
cleared after unload executes or successful
encryption/decryption resumes.
31