AEG ProSense 6000 Series Podręcznik użytkownika - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 stron.
Drukuj stronęwill be adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pauze button to start the
programme again. The ProSense phase can
be repeated up to three times (see point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense detection is carried out
with complete washing programmes only
(no skipping phase selected).
The ProSense is not available with some
programmes, such as Wol/Zijde,
programmes with short cycles and
without washing phase.
12.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Start/Pauze.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pauze again.
The washing programme continues.
22
ENGLISH
12.10 Cancelling a running
programme
1. Press the button Aan/Uit to cancel the
programme and to deactivate the
appliance.
2. Press the button Aan/Uit again to activate
the appliance.
Now, you can set a new washing programme.
If the ProSense phase is already carried
out and the water filling is already
started, the new programme starts
without repeating the ProSense phase.
The water and the detergent are not
drained out in order to avoid waste. The
display shows the maximum duration of
the programme, updating it about 20
minutes after the starting of the new
programme.
12.11 Opening the door - Adding
garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level of the water
in the drum are too high and/or the drum
still rotates you cannot open the door.
1. Touch the Start/Pauze button.
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Start/Pauze
button.