AEG ProSense 6000 Series Podręcznik użytkownika - Strona 25
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 stron.
– there is large amounts of foam during
washing.
• When using detergent tabs or pods,
always put them inside the drum, not in
the detergent dispenser.
Insufficient detergent may cause:
• unsatisfactory washing results,
• the wash load to turn grey,
• greasy clothes,
• mould in the appliance.
Excessive detergent may cause:
• sudsing,
• reduced washing effect,
• inadequate rinsing,
• a greater impact for the environment.
13.4 Ecological hints
To save water, energy and to help protect the
environment, we recommend that you follow
these tips:
• Normally soiled laundry may be washed
without prewash in order to save
detergent, water and time (the
environment is protected too!).
• Loading the appliance to the maximum
capacity indicated for each
programmes helps to reduce energy
and water consumption.
14. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
14.1 Periodic cleaning schedule
Periodic cleaning helps to extend the life
of your appliance.
After each cycle, keep the door and the
detergent dispenser slightly ajar to get air
circulation and dry the humidity inside the
appliance: this will prevent mildew and
odours.
If the appliance is not used for a long time:
close the water tap and unplug the appliance.
Indicative periodic cleaning schedule:
Descaling
Twice a year
• With adequate pre-treatment, stains and
limited soiling can be removed; the
laundry can then be washed at a lower
temperature.
• To use the correct quantity of detergent,
refer to the quantity suggested by the
detergent producer and check the water
hardness of you domestic system. Refer
to 'Water hardness'.
• Set the maximum possible spin speed
for the selected washing programme
before drying your laundry in a tumble
dryer. This will save energy during drying!
13.5 Water hardness
If the water hardness in your area is high or
moderate, we recommend that you additive
for water softening. In areas where the water
hardness is soft it is not necessary to use
him.
To find out the water hardness in your area,
contact your local water authority.
Use the correct quantity of additive for water
softening. Follow the instructions that you find
on the packaging of the product.
Maintenance wash
Clean door seal
Clean drum
Clean detergent dispens‐
er
Clean drain pump filter
Clean the inlet hose and
the valve filter
The following paragraphs explain how you
should clean each part.
Once a month
Every two months
Every two months
Every two months
Twice a year
Twice a year
ENGLISH
25