Brother MFC-J415W Zaawansowana instrukcja obsługi - Strona 22
Przeglądaj online lub pobierz pdf Zaawansowana instrukcja obsługi dla Serwer druku Brother MFC-J415W. Brother MFC-J415W 50 stron. Quick setup guide - spanish
Również dla Brother MFC-J415W: Instrukcja instalacji (35 strony), Specyfikacja techniczna (2 strony), Podręcznik szybkiej konfiguracji (33 strony), (Angielski) Skrócona instrukcja konfiguracji (35 strony)
Drukuj stronę
Chapter 5
Setting up groups for
broadcasting
Groups, which can be stored in a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
only
(Speed Dial), Search, OK,
the two-digit location and Mono Start.
First, you'll need to store each fax number in
a Speed Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a Speed Dial location. You can have
up to six Groups, or you can assign up to
39 numbers in a large Group.
(See Broadcasting (Monochrome only)
on page 8 and Storing Speed Dial numbers in
chapter 7 in the Basic User's Guide.)
a
Press
(Speed Dial).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d
Press a or b to choose the 2-digit
Speed Dial location where you want to
store the Group.
Press OK.
e
Press a or b to choose Add Number.
Press OK.
f
To add numbers to the group, press
a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
16
g
Do one of the following:
To add another number to the group,
5
repeat steps e to f.
If you are finished adding numbers to
the group, press a or b to choose
Complete.
Press OK.
h
Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
on page 19.)