Brother MFC-J4410DW Podręcznik bezpieczeństwa produktu - Strona 15

15 This product should be connected to an AC power source within the range indicated on the

rating label. Do not connect it to a DC power source. If you are not sure, contact a qualified

electrician.

16 This product is equipped with a 3-wire earthed plug. This plug will fit into only an earthed

socket. This is a safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete socket. Do not use the supplied earthed plug in any other

socket except those specified.

17 Do not place anything on top of the power cord including this machine. Do not allow the power

cord to be stepped on.

18 Do not place anything in front of the machine that will block printouts. Do not place anything in

the path of received faxes.

19 Do not touch a document during printing.

20 Never push objects of any kind into this product through cabinet slots, since they may touch

dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never

spill liquid of any kind on the product.

21 Do not attempt to service this product yourself. Opening or removing covers may expose you

to dangerous voltage points and/or other risks. Refer all servicing to service personnel.

22 Unplug this product from the mains power and telephone line sockets, and refer servicing to

qualified Service Personnel under the following conditions:



If the power cord is damaged or frayed.



If liquid has been spilled into the product.



If the product has been exposed to rain or water.



If the product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions. Incorrect

adjustment of other controls may result in damage and will often require extensive work by

a qualified technician to restore the product to normal operation.



If the product has been dropped or the cabinet has been damaged.



If the product exhibits a distinct change in performance, indicating a need for service.

23 This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some

telephones are not compatible. Since noise or speech from the telephone can upset dialling

from this unit, errors may result if the devices are used together in other than quiet conditions.

24 Where it is necessary to dial prefix digits, such as a Caller Display override code ("0196" or

"0197"), this unit will have to be used in conjunction with an associated tone signalling (DTMF)

telephone.

25 Note that some telephones are not compatible with this unit and dialling errors may result if the

two devices are used together in other than quiet conditions. The Telecom Faults Service is

not to be called should such problems arise. In such cases, it is recommended that the prefix

and wanted number are dialled manually.

26 This equipment may not provide for the effective hand-over of a call to another device

connected to the same line.