AEG AGE725E4NW Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka AEG AGE725E4NW. AEG AGE725E4NW 20 stron.
Również dla AEG AGE725E4NW: Podręcznik (8 strony)
10
www.aeg.com
4.7 Door open alarm
If the door has been left open for
approximately 90 seconds, the door
open alarm activates. The LED indicator
of the currently set temperature flashes
and the sound is on.
To turn the sound off press the
temperature key.
You can deactivate this alarm by closing
the door.
If you do not press the key and do not
close the door, the sound switches off
automatically after approximately one
hour to avoid disturbing.
4.8 High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
5. DAILY USE
5.1 Positioning door shelves
The door of this appliance is equipped
with runners that enable shelves/bins to
be arranged according to individual
preferences.
To reposition the door shelves/bins:
1. Gradually lift the shelf/bin in the
direction of the arrows until it comes
free.
2. Place the shelf/bin in desired position
and gently insert it into the runner.
5.2 Removing glass shelves
This appliance is equipped with glass
shelves separating the drawers.
To remove a glass shelf:
1
1
2
an earlier power failure or opening of the
door) activates the high temperature
alarm. The LED indicator of the currently
set temperature flashes and the sound is
on.
To turn the sound off press the
temperature key (if a temperature has
not yet been restored the temperature
indicator keeps flashing).
If temperature is restored and you press
the temperature key, the temperature
indicator stops flashing.
If you do not press the key, the sound
switches off automatically after
approximately around one hour to avoid
disturbing.
1. Remove surrounding drawers (refer
to "Removing drawers").
2. Pull out locking pins on both sides of
the shelf (1).
3. Pull the glass shelf outwards (2).
To put the glass shelf back
follow the above steps in
reverse order.
CAUTION!
When pushing in the locking
pins make sure to insert
them fully in their place.
1
x2
2