Brother DCP-395CN Podręcznik szybkiej konfiguracji - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Oprogramowanie Brother DCP-395CN. Brother DCP-395CN 29 stron. Quick setup guide (español) - english
Również dla Brother DCP-395CN: Lista referencyjna części (32 strony), Podręcznik szybkiej konfiguracji (21 strony), (Angielski) Skrócona instrukcja konfiguracji (28 strony)

USB

For USB interface users (Mac OS X 10.3.9 - 10.4.x - 10.5.x)

Before you install

Make sure your machine is connected to the

power and your Macintosh is ON. You must be

logged on with Administrator rights.

IMPORTANT

• For the latest drivers and information on the

Mac OS X you are using, visit

http://solutions.brother.com/.

• For Mac OS X 10.3.0 to 10.3.8 users, upgrade

to Mac OS X 10.3.9 - 10.5.x.

• Make sure there are no memory cards or a

USB Flash memory drive inserted into the

machine.

Connect the USB cable

IMPORTANT

• DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub.

• Connect the machine directly to your

Macintosh.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the USB cable to the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

LAN

USB

Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

Macintosh.

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Macintosh

symbol. You will find the