Brother HE-120PKG Podręcznik - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik dla Oprogramowanie Brother HE-120PKG. Brother HE-120PKG 42 stron. Accessory catalog

Drukuj stronę

Brother

Embellishment

Feet

Fringe Foot

Gathering Foot

Fringe Foot

Used to mark construction details by creating tailor tacks. Create 3-D

loops and fringe with a single zigzag stitch. Mark construction details

by creating tailor tacks.

Making loops or fringes:

1. Select zigzag stitch and set the stitch width to more than 5 mm.

2. Decrease the upper thread tension and test various settings to see which one works on

the fabric you are using.

3. Line up the center of the presser foot on a drawn pattern line and sew (cut the center of

loops to make fringes).

Creating tailor tacks:

SA142

1. Sew a few stitches to mark.

All Brother home-use sewing machines

2. Mark a guideline to follow on your fabric.

3. Line up the center of the foot with the guideline and sew.

Gathering Foot

Used for gathering fabrics. Ideal for clothing as well as home decor.

Works best on thin to medium weight fabrics.

For gathering:

1. Select a straight stitch, left needle position.

2. Increase the upper thread tension.

3. Place the fabric to be gathered under the presser foot.

To attach the gathered edge to a flat fabric:

1. Select a straight stitch, left needle position.

2. Increase the upper thread tension.

3. Place the fabric to be gathered, right side up, under the presser foot.

4. Slide the fabric not to be gathered into the slit in the presser foot with the surface

SA120

of the fabric facing down.

All Brother home-use sewing machines

Requires Low Shank Adapter for ULT series,

PC-6500, PC-8200 and PC-8500 sewing

machines.

Girl's Dress

Innov-is Project Book

(See page 47 for details.)

Open Toe Foot

Provides better visibility in the needle area. Ideal for securing edges of

appliqué, sewing curves, topstitching, etc.

Adding decorative stitches over seams or patterns:

Line up the center guide mark (red) of the presser foot to the seam or pattern line and sew.

For appliqué:

1. Line up the center guide mark (red) of the presser foot to the edge of appliqué.

2. Zigzag-sew with dense stitches.

Metal type

SA146

SA186

ABCDEFGHJKLMNO

Plastic type

SA147

ABCDEFGHJKLMNO

Pearls and Sequins Foot

Attaches threaded beads, sequins or rounded cords up to 4 mm in

size. Its wide groove also helps you to make or attach piping.

Also used for edge-stitching heavy fabric such as knits.

1. Adjust the upper thread tension.

2. Place threaded beads in groove of the foot.

3. Stitch in place using zigzag stitch with transparent thread.

Brother

Embellishment

Feet

Open Toe Foot

Pearls and Sequins Foot

SA150

ABCDEFJKMN