Brother MFC 795CW - Color Inkjet - All-in-One Instrukcja instalacji - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Oprogramowanie Brother MFC 795CW - Color Inkjet - All-in-One. Brother MFC 795CW - Color Inkjet - All-in-One 47 stron. Quick setup guide - spanish
Również dla Brother MFC 795CW - Color Inkjet - All-in-One: Lista referencyjna części (32 strony), (Angielski) Skrócona instrukcja konfiguracji (46 strony)
Drukuj stronę
For Wireless Network Users
19
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to
assign IP addresses. Choose a configuration method and proceed to the page indicated.
a
If your wireless access point/router does not support SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™, write down the wireless network settings of your wireless access point/router in
the area below.
IMPORTANT
If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot
continue the wireless setup. You should see the documentation provided with your wireless
access point/router, consult the router manufacturer, or your system administrator.
Item
Network Name: (SSID/ESSID)
Password
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using
more than one WEP KEY enter the KEY used for the first WEP KEY.
Now go to
b
If your wireless access point/router supports automatic wireless (one-push) setup
(SecureEasySetup™, Wi-Fi Protected Setup or AOSS™)
Now go to
30
Record the current wireless network settings
page 31
page 33