AEG OKO-SANTO 2842-6 i Instrukcja obsługi i instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Lodówka AEG OKO-SANTO 2842-6 i. AEG OKO-SANTO 2842-6 i 28 stron. Integrating fridge freezer
Również dla AEG OKO-SANTO 2842-6 i: Instrukcja obsługi i instalacji (14 strony)

AEG OKO-SANTO 2842-6 i Instrukcja obsługi i instalacji
Freezer
The freezer compartment, however, will become progressively cove-
red with frost. This should be removed with the special plastic scraper
provided, whenever the thickness of the frost exceeds 4 mm. During
this operation it is not necessary to switch off the power supply or to
remove the foodstuffs.
However when the ice becomes very thick on the inner liner, comple-
te defrosting should be carried out as follows:
1.
Remove the frozen food from
the freezer, wrap it in several
layers of newspaper and put it
in a very cool place.
2.
Switch off the appliance and
pull out the plug.
3.
Leave the freezer compart-
ment door open.
4.
Insert the plastic scraper into
the recess provided under the
defrost water channel and pla-
ce a collecting basin under it.
5.
Once defrosting is completed keep the scraper for future use;
6.
Turn the thermostat knob to the required setting or replace the plug in
the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up
the thawing process other than those recommended by the manufac-
turer.
A temperature rise of the frozen food packs, during defrosting , may
shorten their safe storage life.

Switching off the appliance

To switch off the appliance, turn the temperature regulator to position
"0" or disconnect from the electricity supply.
If the appliance is not going to be used for an extended period:
1.
Remove all refrigerated and frozen packages as well as ice trays.
2.
Remove the mains plug or switch off or turn out the circuit breaker or
fuse.
12