Brother MFC-295CN Podręcznik szybkiej konfiguracji - Strona 28
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Oprogramowanie Brother MFC-295CN. Brother MFC-295CN 45 stron. Inkjet dcp/mfc
Również dla Brother MFC-295CN: Specyfikacja techniczna (2 strony), Lista referencyjna części (32 strony), Skrócona instrukcja obsługi (43 strony)
For Wireless Network Users
For wireless network interface users (MFC-255CW only)
17
Before you begin
First you must configure the wireless network settings of your machine to communicate with your network access
point/router. After the machine is configured to communicate with your access point/router, computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
drivers and software. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal everyday document printing, place the Brother machine as close to the
network access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you
may want to consider choosing USB for the fastest throughput speed.
IMPORTANT
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press 5 to choose 5.Network.
Press 0 to choose 0.Network Reset.
Press 1 twice to choose Reset and Yes.
The following instructions are for infrastructure mode (connected to a computer through an access point/router).
Infrastructure Mode
Access point/router
a
Wireless Network machine (your machine)
b
Wireless capable computer connected to the access point/router
c
Wired computer connected to the access point/router
d
Please make sure the wireless network settings of the machine match the access point/router.
Note
To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access
point/router) you can find instructions in the Network User's Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.
®
For Windows
:
2 Choose your model and the language. The CD-ROM top menu will appear.
3 Click Documentation, and then click HTML documents.
For Macintosh:
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.
28
4
3
1
2