Fujitsu fi-4530C Pierwsze kroki - Strona 16

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Drukarka Fujitsu fi-4530C. Fujitsu fi-4530C 27 stron. Image scanner
Również dla Fujitsu fi-4530C: Podręcznik procedur instalacji (7 strony), Podręcznik procedur instalacji (9 strony), Broszura i specyfikacje (2 strony), Procedury instalacji (3 strony), Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych (14 strony), Instrukcja czyszczenia (13 strony), Instrukcje czyszczenia (2 strony), Instrukcja obsługi (10 strony), Procedura instalacji (5 strony)

Drukuj stronę

7. Documents are scanned, and the scanned

images are displayed on the [ScandAll 21] win-

dow.

If the scanning is completed without any troubles, the

installation was performed successfully.

For details on various types of scanning, refer to the

"fi-4530C Operator's Guide" on the Setup CD-ROM.

For FUJITSU ISIS Scanner Driver

■ Preparation

Confirm the following items before starting to install the

application. Prepare the Setup CD-ROM.

Confirm that the scanner is correctly connected to your

PC.

For details on how to connect the scanner,

refer to "2.2 Connecting the Scanner to

HINT

Your PC" on page 3.

■ Installing the FUJITSU ISIS Scan-

ner Driver

Windows XP screenshots are used in this

section. The windows and operations may

HINT

slightly vary depending on your OS.

1. Turn on the scanner.

2. Turn on your PC and log on to Windows.

ATTENTION

HINT

3. Insert the "Setup CD-ROM" into the CD drive.

⇒

ATTENTION

fi-4530C Image Scanner Getting Started

When using Windows NT 4.0, Windows

2000 or Windows XP, log on as a user

with "Administrator" privileges (privi-

leges of the administrator of your PC).

The scanner may be detected automati-

cally. If so, [Found New Hardware Wizard]

(or [Add/Remove Hardware Wizard]) will

appear. Click [Cancel] to close the Wizard

window. The window may slightly vary

depending on your OS.

The window below is a screenshot for Win-

dows XP.

<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

"Autoplay" setting of your PC is OFF. In

this case, run "Install.exe" in this CD-

ROM directly by the "Explorer" or "My

Computer".