Fujitsu FI-6230 Podręcznik dla początkujących - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Drukarka Fujitsu FI-6230. Fujitsu FI-6230 20 stron. Color duplex workgroup scanners
Również dla Fujitsu FI-6230: Broszura i specyfikacje (2 strony), Instrukcja obsługi (10 strony), Pierwsze kroki (23 strony), Czyszczenie i konserwacja (47 strony)
Drukuj stronę
ATTENTION
Notes for using Adobe Acrobat
When scanning a paper document and converting the
image to PDF using Adobe Acrobat, unexpected images
may be output when:
1. Setting "Edge Shadow Removal" in Acrobat, and setting
"Digital Endorser" or "Black Background" options in the
TWAIN driver at the same time. Letter strings embedded
in the image or the background may be missed.
Solution 1: Set "Edge Shadow Removal" to "OFF" or set
any option other than "Adaptive" for "Color/Grayscale"
and/or "Monochrome" under "Compression" by selecting
[File] [Create PDF] [From Scanner] [Optimization
Options] in Acrobat.
Solution 2: Adjust the scanning density in the TWAIN
driver.
2. Setting "Adaptive" for "Color/Grayscale" and/or
"Monochrome" under "Compression" in Acrobat and
scanning in a resolution lower than the resolution
recommended for Acrobat.
Solution: Set OPTION to something other than
"Adaptive" under "Compression."
3. Scanning a document longer than the double letter
(11x17) or A3 size, when setting "Overscan" in the
TWAIN driver, the scan may fail.
Solution: When scanning a double letter (11x17) or A3
size of document, do not set "Overscan" in TWAIN driver.
*As for detailed usage and information on Acrobat, refer to
"Create a PDF file from a scanned document" in Acrobat
Help.
Support and User registration for Adobe products
For details, refer to the technical support information stored
in the [Customer Support] folder on Adobe Acrobat CD-
ROM. (Note that free person-to-person support is not
available for this is a bundled product.)
9
2.4 Checking Scanner Driver
Operation
This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.
1.
Load the document on the scanner.
For information about how to load the document, refer
to section "2.2 Loading Documents on the ADF for
Scanning" in "fi-6130/fi-6230 Operator's Guide."
2.
Launch ScandAll PRO.
From the [start] menu, select [All Programs]
[Fujitsu ScandAll PRO]
3.
In ScandAll PRO, select [Tool] on the menu, and
then select [Preferences].
⇒
The [Setup] dialog box appears.
4.
On the [Scan] tab, select a driver.
To check the operation of FUJITSU TWAIN 32, select
[TWAIN].
To check the operation of FUJITSU ISIS, select [ISIS].
5.
Click the [OK] button to close the [Setup] dialog
box.
6.
In ScandAll PRO, select [Scan] on the menu, and
then select [Select Scanner].
7.
Select a scanner in the displayed dialog box.
To use FUJITSU TWAIN 32:
[Fujitsu ScandAll PRO].