Brother MFC-J4610DW Podręcznik Start Here - Strona 11

Drukuj stronę

Brother MFC-J4610DW Podręcznik Start Here

Enter personal

information (Station ID)

You should store your name and fax number to be

printed on all fax pages that you send.

Information on how to enter text uuBasic User's

Guide: Entering Text

Press Settings.

Press s or t to display Initial Setup.

Press Initial Setup.

Press s or t to display Station ID.

Press Station ID.

Enter your fax number (up to 20 digits) on the

Touchscreen, and then press OK.

Enter your name (up to 20 characters) using

the Touchscreen, and then press OK.

NOTE

• Press

to cycle between letters, numbers

and special characters. (The characters

available may differ depending on your

country.)

• If you need to enter a character that is on the

same button as the character before, press c to

move the cursor to the right.

• If you entered a character incorrectly and want

to change it, press

the correct character.

Press

NOTE

If you make a mistake and want to start again,

and go back to a.

press

to delete it and re-enter

Fax Transmission Report

Your Brother machine is equipped with a

Transmission Verification Report that can be used as

confirmation that you sent a fax. This report lists the

name or fax number of the receiving party, the date,

time, and duration of the transmission, the number of

pages transmitted, and whether or not the

transmission was successful.

Instructions on using this feature uuBasic User's

Guide: Transmission Verification Report

Set Tone or Pulse dialling

mode (Not available in

New Zealand)

Your machine comes set for Tone dialling service. If

you have a Pulse dialling service (rotary), you need to

change the dialling mode.

Press Settings.

Press s or t to display Initial Setup.

Press Initial Setup.

Press s or t to display Tone/Pulse.

Press Tone/Pulse.

Press Pulse (or Tone).

Press