Brother Quattro 2 6700D Instrukcja obsługi - Strona 34
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Brother Quattro 2 6700D. Brother Quattro 2 6700D 50 stron. Kit para crear efectos decorativos con bobinas
Również dla Brother Quattro 2 6700D: Instrukcja obsługi (16 strony), Instrukcja obsługi (40 strony), (Angielski) Instrukcja obsługi (16 strony)
Drukuj stronę
Additional Functions
After the stitching settings are selected, convert the image data to embroidery data.
*
To clear the entire area and start a new drawing, press
is erased, and the screen appears as it did when My Custom Design was started up (see page 45).
*
To close the application and use the sewing machine, press
drawn is erased (see page 46).
*
To save created data, continue with the procedure described in "Saving Image Data" on page 42.
34
Reducing the Pattern Size
The size of the created pattern can be changed.
Select a size from 50%, 70% and 100%.
Notes
•
The pattern can also be enlarged or reduced from the embroidering
or embroidery-editing screen of the sewing machine. If the desired
size cannot be selected with this software or if a specific size is
required, adjust the size from the sewing machine.
1
Press
in the pattern drawing screen. The screen
shown at the left appears.
2
Press
or
Press
once to reduce the size to 70%. Press
again to reduce the size to 50%.
To return the size to the original size (100%), press
.
3
Press
. The screen returns to the one displayed
before the stitch settings screen was displayed.
beside
.
. All data that had been drawn
. All data that had been