Fujitsu ScanSnap iX100 Podręcznik - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik dla Drukarka Fujitsu ScanSnap iX100. Fujitsu ScanSnap iX100 17 stron.
Również dla Fujitsu ScanSnap iX100: Instrukcja połączenia (12 strony), Pierwsze kroki (2 strony)
Drukuj stronę
■Notes on Using the ScanSnap in a Wi-Fi Connected
Environment
Use the ScanSnap in a secured Wi-Fi connected environment, which
the user is responsible for. If the ScanSnap is used in an unsecured
environment, there is a possibility that important data such as personal
information may be accessed by a third party. PFU Limited assumes no
liability whatsoever for damages or information leakage arising in a Wi-
Fi connected environment, such as if the ScanSnap is used in an
unsecured environment, or if the security is broken in a special way.
Disclaimer of Liability
■Reproducibility of the Scanned Image Data
Confirm that the image data scanned with this product meets your
requirements (for example, image reproducibility in size accuracy,
fidelity, content, colors).
Make sure that there are no missing parts in the scanned image data
before disposing of the original document used for scanning.
Note that when there are sections marked with a highlight pen, the
color of the marked section may not be accurately reproduced
depending on the color and density, or may result in a different color
tone from the original.
■Power Source
The ScanSnap may not work properly if the remaining battery power
is low.
When the USB cable is used, the ScanSnap may not work properly if
the USB port does not provide a power supply of 500 mA. Also, the
ScanSnap may not work properly if the remaining battery power of
the computer is low.
When you charge the ScanSnap while there is no remaining battery
power, the ScanSnap may not start up right after turning it on. In this
case, charge the ScanSnap with it turned off and then turn it on.
11