Brother RuggedJet RJ-4040 Podręcznik użytkownika - Strona 18
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Brother RuggedJet RJ-4040. Brother RuggedJet RJ-4040 34 stron. Mobile printer
Również dla Brother RuggedJet RJ-4040: Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (33 strony), Instrukcja oprogramowania (48 strony), Skrócona instrukcja obsługi (1 strony), Podręcznik bezpieczeństwa produktu (22 strony)
Drukuj stronę
6
Troubleshooting
Overview
This chapter explains how to resolve typical network problems you may encounter when using your Brother
printer. If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions
Center at: http://solutions.brother.com/.
Make sure that the following items are configured before reading this chapter.
First check the following:
The power cord is connected properly and the Brother printer is turned on.
The access point (for wireless configurations) is turned on and its link light is blinking.
All protective packaging has been removed from the printer.
The front and back covers are fully closed.
The roll is inserted properly in the Roll compartment.
I cannot complete the wireless network setup configuration.
Question
Are your security settings
(SSID/Network Key) correct?
Are you using MAC address
filtering?
Is your WLAN access
point/router in stealth mode?
(not broadcasting the SSID)
I have checked and tried all of
the above, but still cannot
complete the wireless
configuration. Is there anything
else I can do?
Is your Brother printer properly
connected to the WLAN access
point/router?
Solution
Reconfirm and choose the correct security settings.
• The manufacturer's name or model no. of the WLAN access point/router may
be used as the default security settings.
• See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
• Ask the manufacturer of your WLAN access point/router or ask your Internet
provider or network administrator.
Confirm that the MAC address of the Brother printer is allowed in the filter. You can
find the MAC address from the Network Setting Tool. See the User's Guide for more
details about the Network Setting Tool.
You should type the correct SSID name or Network Key by hand.
Check the SSID name or the Network Key in the instructions supplied with your
WLAN access point/router and reconfigure the wireless network setup.
Use the Network Setting Tool.
If the Wi-Fi indicator is lit, the network is properly connected. If the Wi-Fi indicator is
blinking, the network is not connected properly, and the wireless network setup must
be reconfigured.
6
6
6
14