Brother DCP-J132W Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Skaner Brother DCP-J132W. Brother DCP-J132W 31 stron. Dcp-j132w
Również dla Brother DCP-J132W: Podręcznik użytkownika (48 strony), Podręcznik użytkownika (44 strony), Pytania (2 strony)
Drukuj stronę
f
Gently push the back of the ink cartridge
marked "PUSH" until the cartridge lever lifts.
After all the ink cartridges are installed, close
the ink cartridge cover.
NOTE
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
5
Load plain A4 paper
a
Pull the paper tray a completely out of the
machine.
b
Open the output paper tray cover a.
4
c
d
1
NOTE
1
Gently press and slide the paper width
guides a and then the paper length guide b to
fit the paper size.
Make sure that the triangular marks c on the
paper width guides a and paper length
guide b line up with the mark for the paper size
you are using.
Fan the stack of paper well to avoid paper jams
and misfeeds.
Always make sure that the paper is not curled or
wrinkled.
1
3
2
3