Brother MFC-J245 Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner Brother MFC-J245. Brother MFC-J245 47 stron.
Również dla Brother MFC-J245: Podręcznik szybkiej konfiguracji (20 strony), Podręcznik użytkownika (48 strony), Podręcznik użytkownika (44 strony), Podręcznik szybkiej konfiguracji (21 strony)
Drukuj stronę
Additional sending
operations
Sending a fax manually
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
NOTE
To send a multi-page fax, use the ADF.
a
Load your document.
b
Press
(FAX).
c
To listen for a dial tone, press Hook.
d
Dial the fax number.
e
When you hear the fax tones, press
Black Start or Color Start.
If you are using the scanner glass, press
1 to send the fax.
Sending a fax at the end of a
conversation
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press
(FAX).
d
Press Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
e
Replace the handset of the external
phone.
Dual Access
(Black & White only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
3
sending from memory, receiving faxes or
printing PC data. The LCD displays the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If the Out of Memory message
appears, press Stop/Exit to cancel or
Black Start to send the pages scanned so
far.
Broadcasting
(Black & White only)
Broadcasting is automatically sending the
same fax message to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
3
Report will be printed.
Before you begin the broadcast
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Basic User's Guide:
Storing Speed Dial numbers.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Speed Dial numbers for easier dialing.
(See Setting up Groups for Broadcasting
on page 20.)
Sending a fax
3
3
3
3
9