Fujitsu D2779 Podręcznik techniczny - Strona 21

Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Płyta główna Fujitsu D2779. Fujitsu D2779 32 stron. System board d2779 for primergy tx100 s2

Drukuj stronę
Fujitsu D2779 Podręcznik techniczny
Features
3.2.1

Fitting rules

Minimum required for booting the system is one UDIMM (socket DIMM 1A).
Therefore, memory boards must be fitted with UDIMMs as follows.
The maximum performance can be achieved in a symmetric dual-channel
configuration. Therefore, both channels have to be populated with the same
amount of memory. The DRAM device technology may vary from one channel
to the other.
If the amount of memory differs between the two channels, the system board
will run in dual-channel asymmetric mode.
Regardless of the mode, all DIMMs will run at the highest common frequency
that is allowed by the SPD data of the DIMMs and the maximum speed of the
selected configuration.
Mode
Configuration DIMM 1A
Single-
channel
Single-
/dual-
channel
Dual-
channel
Dual-
channel
Table 1: Configuration of the main memory
Configuration 1: single-channel configuration
Configuration 2:
The dual-channel mode is only activated, if the size of the used memory module
in socket DIMM 1B is equal to the summary of the memory modules in the
sockets DIMM 1A and DIMM 2A
(e.g. DIMM 1A = 1GB, DIMM 2A = 1GB, DIMM 1B = 2GB).
Configuration 3 and 4:
For dual-channel configuration arrange identical memory modules in pairs of
the sockets.
D2779 (TX100 S2)
black
1
populated
2
populated populated populated
3
populated
4
populated populated populated populated
Technical Manual
DIMM 2A
DIMM 1B
blue
black
- -
- -
- -
populated
Main memory
DIMM 2B
blue
- -
- -
- -
21