Fujitsu D2861 Podręcznik techniczny - Strona 39

Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Płyta główna Fujitsu D2861. Fujitsu D2861 40 stron. System board for for bx922 s2

Replacing the lithium battery

In order to save the system information permanently, a lithium battery is

installed to provide the CMOS-memory with a current. When the charge is too

low or the battery is empty, a corresponding error message is provided. The

lithium battery must then be replaced.

CAUTION!

The lithium battery must be replaced with an identical battery or a battery

type recommended by the manufacturer.

This information does not apply to the Japanese market.

Do not throw lithium batteries into the trash can. Batteries must be

disposed of in accordance with local regulations concerning special

waste.

Make sure that you insert the battery the right way round. The plus pole

must be on the top!

Figure 13: Replacing the lithium battery

Ê Press the locking spring into direction of the arrow (1), so that the lithium

battery jumps out of its socket.

Ê Remove the battery (2).

Ê Insert a new lithium battery of the same type into the socket (3) and (4).

After replacing the battery date and time have to be set again.

BIOS settings are set to default values.

D2861 (BX922 S2)

Technical Manual