Fujitsu D3313-S Instrukcja montażu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Płyta główna Fujitsu D3313-S. Fujitsu D3313-S 15 stron.
Drukuj stronę
- 1. Table of Contents
- 2. Step 1 Prepare the Chassis
- 3. Step 2 Mount the Cooler
- 4. Step 3 Insert RAM
- 5. Step 4 Put Board in Chassis
- 6. Step 5 Wire HDD
- 7. Step 6 Mount HDD
- 8. Step 7 Add Cross Bar
- 9. Step 8 Close Chassis
- 10. Optional: Application of a Passive Riser Card + Graphic Card AMD W2100
- 11. Step 9 Mount Msata
- 12. Step 10 Insert Passive Riser Card
- 13. Step 11 Add Graphic Card AMD W2100
Assembly Instructions
D3313-S
Now push down the board so that the holes on the board fit onto the screw holes on the chassis.
Now screw in the board in all four holes. The board should now look like this:
__________________________________________________________________________________________________________________________________________________________
Page 6 of 15
www.fujitsu.com