Fujitsu MB91460 SERIES Pierwsze kroki - Strona 12

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Płyta główna Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 stron. 32-bit microcontroller
Również dla Fujitsu MB91460 SERIES: Podręcznik użytkownika (45 strony), Nota aplikacyjna (23 strony), Nota aplikacyjna (26 strony), Nota aplikacyjna (29 strony), Nota aplikacyjna (29 strony)

4.3.3 Connecting and Cabling the Adapter Board to the Evaluation Board

Depending on the evaluation board, a probe cable is required or not. The following sections

describe the connection of the adapter board to the evaluation board SK-91460-Main or to

the evaluation board SK-91F467D-208PFV with the probe cable PB-91467D-208PFV or PB-

91467D-LS-208PFV

1. Connect both boards. Be aware, that the boards are tight connected.

Figure 4 shows the connected boards.

Figure 4: Connected Adapter Board and Evaluation Board

After connecting both boards together it is necessary to connect the DSU-FR Cable

MB2198-10 and the power supplies.

2. Connect the DSU-FR Cable MB2198-10 to the evaluation board.

3. Connect the 16 V DC power supply to the port 'DC in' and to 230 V. Please, be

aware, that 'SW2 Power' is off.

4. Provide the 9 V DC power supply and connect it to 230 V. The following figure shows

the correct polarisation. Do not power up the evaluation board by connecting the

power supply yet.

Figure 5: The Correct Polarisation of the 9 V DC Power Supply.

MCU-AN-391005-E-V17

Getting Started

Chapter 4 Installation of the Emulation System

GND

- 12 -

9 V