Fujitsu MB91460 SERIES Pierwsze kroki - Strona 16

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Płyta główna Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 stron. 32-bit microcontroller
Również dla Fujitsu MB91460 SERIES: Podręcznik użytkownika (45 strony), Nota aplikacyjna (23 strony), Nota aplikacyjna (26 strony), Nota aplikacyjna (29 strony), Nota aplikacyjna (29 strony)

Drukuj stronę

5.1.2 Emulator Interface

The emulator interface can be terminated if the in-circuit-emulator (ICE) is not used.

Jumper

S14

USER – INITX

INITX

INITX – ICE

S15

USER – TRSTX

TRSTX

TRSTX – ICE

S16

PD_OFF – ICD3

ICD3

ICD3 – PD_ON

S17

PD_OFF – ICD2

ICD2

ICD2 – PD_ON

S18

PD_OFF – ICD1

ICD1

ICD1 – PD_ON

S19

PD_OFF – ICD0

ICD0

ICD0 – PD_ON

S20

PD_OFF – BREAK

BREAK

BREAK – PD_ON

Default:

S14 = INITX–ICE

S16 = OFF–ICD3

S20 = OFF–ICD0

Note:

1) If the in-circuit-emulator (ICE) is used, the default settings have to be used.

MCU-AN-391005-E-V17

Getting Started

Chapter 5 Jumpers and Switches

Setting

Description

INITX is controlled by the evaluation board

INITX is controlled by the emulator

TRSTX is controlled by the evaluation board

TRSTX is controlled by the emulator

Disconnect pull-down resistor to ICD3

Connect pull-down resistor to ICD3

Disconnect pull-down resistor to ICD2

Connect pull-down resistor to ICD2

Disconnect pull-down resistor to ICD1

Connect pull-down resistor to ICD1

Disconnect pull-down resistor to ICD0

Connect pull-down resistor to ICD0

Disconnect pull-down resistor to BREAK

Connect pull-down resistor to BREAK

S15 = TRSTX–ICE

S17 = OFF–ICD2

- 16 -

S20 = BREAK-ON

S18 = OFF–ICD1