Fujitsu P4 Titan-DDR GA-8STXC Podręcznik użytkownika - Strona 32
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Płyta główna Fujitsu P4 Titan-DDR GA-8STXC. Fujitsu P4 Titan-DDR GA-8STXC 44 stron. P4 titan-ddr
Również dla Fujitsu P4 Titan-DDR GA-8STXC: Podręcznik użytkownika (43 strony)
Drukuj stronę
IDE1 Conductor Cable
Auto
ATA66/100
ATA33
IDE2 Conductor Cable
Auto
ATA66/100
ATA33
On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
AC97 Audio
Enabled
Disabled
USB Controller
Enabled
Disabled
USB Legacy Support
Enabled
Disabled
This Manual: http://www.manuallib.com/file/2597476
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
Will be automatically detected by BIOS. (Default Value)
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Enable onboard AC'97 audio function. (Default value)
Disable this function.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB Legacy Support.
Disable USB Legacy Support. (Default value)
- 31 -
BIOS Setup