Fujitsu SK-91460T-144PMC-GPIO Podręcznik użytkownika - Strona 21
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Płyta główna Fujitsu SK-91460T-144PMC-GPIO. Fujitsu SK-91460T-144PMC-GPIO 47 stron. Mb91460 series
Drukuj stronę
LIN-UART 7:
Jumper
JP49
(RXD)
JP53
(TXD)
JP55
(RS232/LIN)
JP45
(RTS-CTS)
JP51
(DTR/RTS)
JP61
(LIN enable)
JP65
(LIN master)
JP57
(LIN Vbat)
By default, UART7 is connected to X5 and configured as RS232 interface.
© Fujitsu Microelectronics Europe GmbH
SK-91460T-144PMC-GPIO User Guide
Chapter 3 Jumpers and Switches
Setting
Description
1-2
SIN7 is connected to RS232 transceiver
2-3
SIN7 is connected to LIN transceiver
1-2
SOT7 is connected to RS232 transceiver
2-3
SOT7 is connected to LIN transceiver
1-2
X5 Pin2 is connected to RS232 transceiver (T1out)
2-3
X5 Pin2 is connected to LIN transceiver (BUS)
Closed
RTS and CTS of X5 are connected
Open
RTS and CTS of X5 are not connected
1-2
DTR signal (Pin 6 of X5) is used as reset source
2-3
RTS signal (Pin 7 of X5) is used as reset source
Closed
LIN transceiver for X5 is enabled
Open
LIN transceiver for X5 is disabled
Closed
LIN-UART 7 is LIN Master
Open
LIN-UART 7 is LIN Slave
Closed
Pin 1 (LIN Vs) of X5 is connected to Vin
Open
Pin 1 (LIN Vs) of X5 is not connected to Vin
Table 3-9: UART 7 Settings
- 21 -
FMEMCU-UG-910074-11