Fujitsu SK-91464A-100PMC Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Płyta główna Fujitsu SK-91464A-100PMC. Fujitsu SK-91464A-100PMC 28 stron. Mb91460 series
Drukuj stronę
3 Jumpers and Switches
This chapter describes all jumpers and switches that can be modified on the evaluation
board. The default setting (MB91F464AA Series) is shown with a grey shaded area.
3.1 Operating Mode (S2)
Since the MB91F464A MCU does not feature an external bus interface, the Mode switch
normally is obsolete and not mounted by default.
DIP switch
S2/1 (MD0)
S2/2 (MD1)
S2/3 (MD2)
S2/4
Dip-Switch S2
(default setting)
© Fujitsu Microelectronics Europe GmbH
SK-91464A-100PMC User Guide
Chapter 3 Jumpers and Switches
Setting
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
not connected
MD0 MD1 MD2 nc
1
2
3
- 11 -
Logical value
1 (high)
0 (low)
1 (high)
0 (low)
1 (high)
0 (low)
ON
OFF
4
FMEMCU-UG-910025-15