A-Neu Video HD-44G Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy A-Neu Video HD-44G. A-Neu Video HD-44G 20 stron. 4x4 hdmi matrix switcher
Drukuj stronęA
NEUVIDEO
Before making any connections to the switcher. Observe the following:
• Ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input select buttons. The supplied IR remote
control. Or through the RS-232 serial communications port.
• Upon powering up the switcher, it will return to its last used setting before being powered down.
IR REMOTE CONTROL KEY
SWITCH POWER ON or OFF:
q w
Power ON and OFF
DESTINATION: 1 thru 4 OUTPUT SELECTION:
e
Destination buttons to select the output display channel
SOURCE: 1 thru 4 INPUT SOURCE SELECTION:
r
Input 1~ 4 source selection buttons
FUNCTION KEY:
Function selection buttons
t
ALL
DEMO or ENTER
SELECT EDID MODES: PRESS SOURCE BUTTONS 1 thru 2:
y
1. Mode 1 : FSS (Fast Speed Start)
2. Mode 2 : H24-3D
3. Mode 3 : H24M-3D
4. Mode 4 : H36
5. Mode 5 : H36M
6. Mode 6 : H36-3D
7. Mode 7 : H36M-3D
EDID
LOCK
7