Indesit IND73W Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Indesit IND73W. Indesit IND73W 26 stron.

Install the water inlet hoses to your hot and cold water taps, as described below.

Check and ensure that the sealing washers are ﬁrmly in place.

Attach the straight end of the hose to your water taps. Make sure to attach the hot

water supply hose (with red markings) to the hot water tap and the cold water

supply hose (with blue markings) to the cold water tap.

Tighten the coupling nuts securely by hand, as illustrated below (the sealing

washer is part of and located inside the tap end).

Attach the curved end of the hose to the corresponding inlet valve of the washer.

Tighten the coupling nuts securely by hand, as illustrated below.

Tighten the nut by turning it clockwise while holding the hose. (To detach the water

supply hose, turn the nut anticlockwise after turning the tap off.)

Turn on the taps and check for leaks. Tighten the coupling nuts ﬁrmly if there is any

leakage. If your water pressure is strong, close the water tap completely, then open

it slightly.