Indesit WIXE 127 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Indesit WIXE 127. Indesit WIXE 127 12 stron. Washing machine
Również dla Indesit WIXE 127: Instrukcja obsługi (17 strony), Instrukcja obsługi (48 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

Personalisations

FUNCTION buttons

appears; this decreases every hour until the start of the cycle. In this phase, the "delay" can only be modified by

decreasing it.

The Delay Timer regulation is enabled with all programmes.

Setting the temperature

If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature needs

to be regulated, a fixed

set will be displayed and the

indicates a cold wash cycle (press it again to go back to the maximum value); stop on the desired value, after

approximately 2 seconds the setting is accepted: the symbol

The temperature adjustment is enabled with all wash programmes.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the

programme set.

If you set a function that is incompatible with another function you selected previously, only the last one selected

will be enabled.

Function

Effect

Bleaching cycle

designed to

Stain

remove the

removal

toughest stains.

Increases the

efficiency of the

rinse.

Extra Rinse

This option

reduces the

amount of

creasing on

fabrics, making

them easier to

Easy iron

iron.

Setting the spin cycle

If, when the appliance is switched on, the KNOB is positioned on

a programme with a spin cycle,

and the maximum spin speed allowed for the programme set

will be displayed, and the

values lower until they reach OFF, which indicates that the spin

cycle has been excluded (press it again to go back to the

maximum value); stop on the desired speed, after approximately

2 seconds the setting is accepted: the symbol

The spin cycle setting is enabled with all the programmes except

for 6 and the Draining cycle.

Setting the Delay Timer

Press the button

display, while the relative symbol flashes.

Press the button again and "1h" appears, that is, a delay of one

hour (this can reach up to 24h); stop on the "desired" delay; after

approximately 2 seconds the setting is accepted, following which,

the time for the set programme appears on the display and the

symbol

If you now press the START/RESET button, the set "delay"

appears. Press button

and the maximum temperature allowed for the programme

icon flashes. Press it again and the temperature lowers until it reaches OFF, which

Comments

Please remember to pour the bleach into extra compartment 4

(see page 8).

This function is incompatible with the EASY IRON function.

Recommended when the appliance has a full load or with large

quantities of detergent.

When this function is set, programmes 4, 5, 6 will end, with the

laundry left to soak (Anti-crease), and the relative button flashes:

- to conclude the cycle, press the START/RESET button or the

EASY IRON button;

- to run the draining cycle alone, set the knob to the relative

symbol

and press the START/RESET button.

This function is incompatible with the STAIN REMOVAL function.

a fixed appears. Press button

icon flashes. Press it again and the

and you will see the word OFF on the

remains on.

remains fixed.

Enabled with

programmes:

2, 3, 4,

Rinse cycle.

1, 2, 3, 4, 7,

8, 9, 11, 12,

Rinse cycle.

3, 4, 5, 6, 7, 8,

9, Rinse

cycle.