A-Neu Video ANI-0108POE-AU Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kable i złącza A-Neu Video ANI-0108POE-AU. A-Neu Video ANI-0108POE-AU 16 stron. Hdmi splitter over cat6

Drukuj stronę

NEUVIDEO

FEATURES

• HDMI 2.0, HDCP 2.2 / 1.x and DVI 1.0 compliant

• Supports 18Gbps video bandwidth

• Supports video resolution up to 4K2K@50/60Hz 4:4:4

• Supports 3D, HDR, HDR10+, HLG and Dolby vision

• Supports up to 7.1CH HD audio pass-through

• Supports digital and analog audio de-embedded output

• Extends the signal transmission distance up to 114ft/35M at the resolution of 4K2K@60Hz, 164ft/50M at 4K2K@30Hz, 196ft/60M at

1080P@60Hz via a single CAT6/6a/7 cable

• Supports (1) HDMI input, (1) HDMI loop output and (8) CAT outputs

• Supports one-way IR control signal pass-through

• Advanced EDID management

• Supports one-way PoC function (only from transmitter to receiver)

• Compact design for easy and flexible installation

NOTES

For the best results, it is suggested you use pure copper and not copper clad aluminum and use solid, riser rated cable and not stranded

cable. Stranded cable has ~20% higher signal attenuation than solid, so its runs need to be shorter.

Contiguous cable runs are preferred. The use of network punch down into patch panels and keystone jacks adds attenuation and runs

need to be shorter.

The use of EZ-45® connectors are not recommended as the cable extends outside the end of the RJ45 connector and can act as an

inductor of noise.

FEATURES