Indesit D2I HD526 UK Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Zmywarka Indesit D2I HD526 UK. Indesit D2I HD526 UK 2 stron.

Drukuj stronę

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories:

For information on comparative EN testing conditions, please send an email to the following address: [email protected]

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

DELAY

The start of the program may be delayed for a period of time

between 1 and 12 hours.

The DELAY function cannot be set once a wash cycle has been started.

TABLET (Tab)- If you use powder or liquid detergent, this option

should be off.

LOADING THE RACKS

UPPER RACK

(loading example for the

upper rack)

Load delicate and light

dishes: glasses, cups, saucers,

low salad bowls.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds

etc.) please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

TROUBLESHOOTING

In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues

please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period

of either up to 7 or up to 10 years, according to the specific Regulation requirements.

PROBLEMS

POSSIBLE CAUSES

The dishwasher does not

No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.

fill the water.

Display shows: H,

The inlet hose is bent.

6 and On/Off LED is

blinking rapidly

The sieve in the water inlet hose is clogged; it is

necessary to clean it

Dishwasher finishes the

Drain hose positioned too low or siphoning into

cycle prematurely.

home sewage system.

Display shows: 15 and On/

Off LED is blinking rapidly

Air in water supply.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-

sales Service, please state the codes provided on your product's identification plate.

The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model

identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.

LOWER RACK

(loading example for the

lower rack)

For pots, lids, plates, salad

bowls, cutlery etc.. Large

plates and lids should ide-

ally be placed at the sides

to avoid interferences with

the spray arm.

Please scan the QR code on your product in order to have more detailed information.

PUSH&GO

allows you direct access to the Push&GO program, a wash and dry cycle

that ensures great cleaning performance in a short time. You don't have to worry

which program to choose, Push&GO cycle will do the work for you.

CUTLERY BASKET

FOLDABLE

The basket is equipped with top grilles for improved cutlery arrangement.

FLAPS

WITH AD-

The cutlery basket should be positioned only at the front of the lower rack.

JUSTABLE

POSITION

Knives and other utensils with sharp edges must be placed in the

cutlery basket with the points facing downwards or they must be po-

sitioned horizontally in the tip-up compartments on the upper rack.

CLEANING THE SPRAY ARMS

To remove the upper spray arm,

turn the plastic locking ring in a

clockwise direction.

Please scan the QR code on your product in order to have more detailed information.

SOLUTIONS

Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and

reboot.

After having carried out the verification and cleaning, turn off and turn on the dishwasher

and restart a new program.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check for sipho-

ning into home sewage system, install air admittance valve if necessary.

Check water supply for leaks or other issues letting air inside.

Push&GO button is an easily distinguishable button that

CAPACITY: 14 standard place-settings

More information in the Daily Reference Guide on website.

The lower spray arm may

be removed by pulling it

upwards.

IEC 436

400011658929B

01/2023 dk - Xerox Fabriano