Indesit DIFP 68T1 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Indesit DIFP 68T1. Indesit DIFP 68T1 44 stron. Indesit difp 68t1 dishwasher operating instructions
Drukuj stronę
Special wash cycles and Options
Notes:
EN
Optimum performance levels when using the "Rapid" cycle
can be achieved by respecting the specified number of place
settings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
Wash cycle EXTRA
EXTRA makes it possible to carry out a heavy-duty wash
cycle of large crockery up to a max height of 53cm:
baking pans, oven grids, dripping pans, hob grids, large
saucepans, serving dishes, pizza dishes, stainless-steel
hood filters.
Remove the upper rack to load bulky crockery.
n order for the water to reach the crockery everywhere,
I
arrange it as shown in the Figure.
The cycle can also be used on large delicate crockery
using the option Extra Light (see Wash Options).
Do not start the dishwasher without the upper rack
using wash cycles other than EXTRA.
To carry out the wash cycle Extra and Extra with the
Light* option pour the detergent directly into the tub
and not into the dispenser.
12
Release the two locks (right
and left) and pull out the rack.
When the upper rack is fitted,
the locks must be always
closed.
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start
The start of the wash cycle may be delayed for a
period of time between 1 and 12 hours.
1. Press the DELAYED START button: the corresponding
symbol appears on the display; each time you press the
button, the time (1h, 2h, etc. up to max. 12h) from the start
of the selected wash cycle will be increased.
2. Select the cycle and close the door: the timer will begin
counting down;
3. Once this time has elapsed, the indicator light switches
off and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
press the DELAYED START button. To cancel it, press the
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.
The Delayed Start function cannot be set once a wash cycle
has been started.
*
Only available in selected models.