Indesit DDD 5340 C IX Instrukcja instalacji i użytkowania - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Piekarnik Indesit DDD 5340 C IX. Indesit DDD 5340 C IX 28 stron.
Drukuj stronę
The electronic programmer
•• ••
END OF
COOKING icon
DURATION
icon
DECREASE TIME
button
! The Top Oven and Main Oven can be controlled by
the automatic timer. When the timer control has been
set for one oven, it is possible to use the other oven
only during the same automatic cooking programme.
! NEVER operate the grill when the ovens are set to
cook automatically because the oven cavity can
become warm and this may cause bacterial growth
in food.
Setting the clock
! The clock may be set when the oven is switched off
or when it is switched on, provided that the end time of
a cooking cycle has not been programmed previously.
After the appliance has been connected to the mains,
or after a blackout, the
icon and the four numerical
digits on the DISPLAY will begin to flash.
1. Press the
button several times until the
and the four digits on the display begin to flash.
2. Use the "+" and "-" buttons to adjust the time; if you
press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the desired value.
3. Wait for 10 seconds or press the
finalise the setting.
Setting the minute minder
! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the
button several times until the
and the three digits on the display begin to flash.
2. Use the "+" and "-" buttons to set the desired time;
if you press and hold either button, the display will
scroll through the values more quickly, making it
quicker and easier to set the value.
3. Wait for 10 seconds or press the
finalise the setting.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will
be activated.
DISPLAY
CLOCK icon
TIMER icon
INCREASE TIME
button
SET TIME
button
icon
button again to
icon
button again to
Programming cooking
! A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the
button several times until the
and the three digits on the DISPLAY begin to flash.
2. Use the "+" and "-" buttons to set the desired
duration; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the value.
3. Wait for 10 seconds or press the
finalise the setting.
4. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds. Press any button to stop the
buzzer and turn all control knobs to 0 position.
•
For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed. The programme
will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Next, press the
button until the
four digits on the DISPLAY begin to flash.
3. use the "+" and "-" buttons to adjust the cooking
end time; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the desired value.
4. Wait for 10 seconds or press the
finalise the setting.
5. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer
sounds.Press any button to stop
the buzzer and turn all control knobs to 0 position.
Programming has been set when the
are illuminated. The DISPLAY shows the cooking end
time and the cooking duration alternately.
•
For example: It is 9:00 a.m. and a duration of 1
hour has been programmed. 12:30 is scheduled as
the end time. The programme will start
automatically at 11:30 a.m.
GB
icon
button again to
icon and the
button again to
and
buttons
9