Indesit HOTPOINT LUCE DX1032CX Instrukcja serwisowa - Strona 35
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Piekarnik Indesit HOTPOINT LUCE DX1032CX. Indesit HOTPOINT LUCE DX1032CX 39 stron. Built-in touch control electronic multifunction 60 cm double oven
Drukuj stronę
Indesit
Company
8.
Feed the replacement sensor wire back through the oven cavity and fit the sensor retaining screw
inside the cavity.
9.
Channel the wire up and fit to the power board.
10. Gather up the previously released wires and cable tie together. Reassemble in reverse order.
Top Oven probe identified
by plastic connector
20) Telescopic Runner Shelf Supports
1.
In order to remove the shelf supports, pull out from the sides.
2.
Remove the screw from the left hand or right hand sides and remove.
3.
Reassemble in reverse order.
21) Door Seals
1.
The door seals are located via clips in their respective corners.
2.
Slightly stretch the seal in order to locate the clips into the holes on the chassis front.
Service Manual UK
Wires to be gathered up into the cable tie after replacing
the sensor probe
35 of 39
Main Oven probe identified
by 2 amp tags
English