Indesit KD640G Instrukcja instalacji i użytkowania - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Kuchenki Indesit KD640G. Indesit KD640G 36 stron. Free standing gas cooker

Installation Instructions

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the

grill injector. Access to the injector is by first removing the baffle at the front of the grill

fastened by two screws. Then remove the fastening screw on the right hand side of the

burner and slide the burner off the injector. Ensure that the grill burner is correctly

located under the fixing screw on reassembly.

Fit the hotplate burner bodies and caps, pan supports and shelf shield(s). Referring to

the instructions for use where necessary,

1. Check that the hotplate and grill burners ignite correctly and burn with a

steady flame. Check for a steady flame on the low setting.

2. Check that with the main oven set to mark 9, the burner ignites at low rate,

and then increases to full rate within 60 seconds. Leave the oven full on with

the door closed for 10 minutes, and check that when the control is turned to

the 'Slow Cook' setting that the flame reduces.

3. Check that with the top oven set to mark 8, the burner ignites at low rate,

and then increases to full rate within 60 seconds. Leave the oven full on with

the door closed for 10 minutes, and check that when the control is turned to

mark 1 that the flame reduces.

4. Check the operation of the oven timer and oven light(s).

Instruct the user on operation of the cooker.

NOTE - Models KD643G and KD641G only: It is normal for a slight resistance to be

felt when turning the Top Oven/Grill control to the oven settings, as the control

operates a flap at the rear of the cooker.