Indesit RID60G2 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kuchenki Indesit RID60G2. Indesit RID60G2 24 stron. Free standing gas cooker

Drukuj stronę

Care and Cleaning

! Never use steam cleaners or pressure cleaners on

the appliance.

Clean the glass part of the oven door using a sponge

and a non-abrasive cleaning product, then dry

thoroughly with a soft cloth. Do not use rough abrasive

material or sharp metal scrapers as these could

scratch the surface and cause the glass to crack.

The accessories can be washed like averyday

crockery (even in your dishwasher).

! Switch off the electricity supply and allow to cool

before cleaning the cooker.

! Clean the cooker regularly and wipe up spills soon

after they occur to prevent them from becoming

burnt on. Never use biological washing powder,

caustic cleaners, harsh abrasives, scouring pads,

steam cleaners, aerosol cleaners or oven chemical

cleaners of any kind.

! If it is necessary to remove the cooker for

cleaning, ensure that it is cool and beware that it is

heavy (approximately 70 kg 155 lbs).

! To move the cooker forward, open the top oven/grill

door and with both hands positioned under the roof

of the compartment, lift and pull forward. Replace by

pushing the cooker backwards.

! Check that the cooker is level. Take care not to

damage any floor coverings.

COOKER FINISH

Vitreous Enamel

Door inner panels, pan supports, burner caps,

roasting dish, grill pan, main oven base, inside of

grill compartment.

Hotplate

Paint

Side panels.

Control panel, lid front trim

Aluminium

Hotplate burner bodies, lid rear trim.

Glass

Chromium Plating

Oven shelves, grill pan grid, grill pan handle

support.

Plastic

Control knobs.

Stainless Steel

Hotplate, control panell, grill pan handle,

*Concerns certain models only

Oven Shelf Supports*

Oven Shelf Supports

The shelf supports are removable and dishwasher

safe.

To remove

To remove hold the support at the front lift and pull

To remove

a sink or a dishwasher. When removed it allows

access to the oven side, which can be cleaned with

warm soapy water.

To refit the support, insert the longer leg into the

To refit

rear fixing hole and push in the front leg.

REPLACEMENT OF OVEN LIGHT BULB

CAUTION: DISCONNECT THE APPLIANCE FROM

THE ELECTRICITY SUPPLY BEFORE

REPLACING THE LAMP TO AVOID THE

POSSIBILITY OF AN ELECTRIC SHOCK.

Light bulbs are not covered by the manufacturer's

guarantee.

A new 25W, 300°C rated SES bulb can be obtained

from your cooker supplier or any major electrical

retailer.

1. Remove the shelves from the oven.

2. Unscrew the lens using a thick cloth to protect your

fingers in the unlikely event of a lens fracture.

3. Unscrew bulb.

4. Fit new bulb and refit lens.

CLEANING METHOD

Cloth wrung out in warm soapy water. Stubborn stains can be remo-

ved with a cream paste, liquid cleaner or by rubbing with fine steel

wool soap pads.

Check that the cleaning agent is approved by the Vitreous Enamel

Association.

Wash with a cloth wrung out in warm soapy water only.

DO NOT USE ABRASIVES.

Similar to paint cleaning above. Use a nylon brush to remove any

cleaning materials, water or dirt from the hotplate burner bodies.

As for enamel cleaning. Polish with a clean dry cloth or kitchen roll.

Wipe with a cloth wrung out in warm soapy water. A fine steel wool

soap pad e.g. Brillo, Ajax, or a chrome or stainless steel cleaner

may be used.

Wipe with a cloth wrung out in warm soapy water.

Wipe with a cloth wrung out in warm soapy water. Polish with a cle-

an dry cloth or kitchen towel. For stubborn stains, use a proprietary

stainless steel cleaner and follow the instructions on the container.