Indesit ISL60V Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka Indesit ISL60V. Indesit ISL60V 16 stron. Indesit tumble dryer instruction booklet

Drukuj stronę

Maintenance and Care

Switching off the electricity

Unplug your dryer when not using it, when cleaning it

and during all maintenance operations.

Clean the filter after each cycle

The filter is an important part of your dryer:

it accumulates lint and fluff that is formed while dry-

ing.

Small items could also become trapped in the filter.

When finished drying, therefore, clean the filter by

rinsing it under running water or with your vacuum

cleaner. Should the filter become clogged up, the air-

flow inside the dryer will be seriously compromised:

drying times lengthen and you will consume more

energy. It may also damage your dryer.

! Do not use the dryer without replacing the filter.

Check the drum after each cycle

Turn the drum manually in order to remove small

items (handkerchiefs) that could have been left

behind.

The filter is found in front

of the dryer trim

(see diagram).

Removing the filter:

1. Pull the plastic grip of

the filter upwards (see

diagram).

2. Clean the filter and

replace it correctly.

Ensure the filter is fully

located flush into the

tumble dryer trim.

Cleaning

External parts in metal or plastic and rubber parts

can be cleaned with a damp cloth.

Periodically check the vent tube and any

permanent venting fixture to make sure that there

has been no accumulation of fluff or lint, and

remove it.

Periodically clean the surface of the stainless

steel sensor inside the drum with vinegar to

remove water contaminates. Apply carefully with

a cloth, this will maintain the drying performance

of the dryer. The sensor is located on the plastic

vane inside the drum towards the front of the

dryer. Rotate the drum if necessary to locate it.

Remove lint that collects around the filter and the

outlet vents.

! Do not use solvents or abrasives.

! Your dryer uses special bearing components which

do not need lubrication.

! Have your dryer checked regularly by authorised

technicians to ensure electrical and mechanical safe-

ty (see Service).