A-Neuvideo ANI-1201HD Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik A-Neuvideo ANI-1201HD. A-Neuvideo ANI-1201HD 16 stron. 12 input multi format video switcher with hdbase-t, vga and hdmi outputs
Również dla A-Neuvideo ANI-1201HD: Instrukcja obsługi (17 strony)

Drukuj stronę

NEUVIDEO

Firmw are Updating / System Diagram

Firmw are Updating

The ANI-1201HD supports firmware field-updating by USB flash disk.

Note: ANI-1201HDUpdateFile.bin" file is provided by A-NeuVideo engineering department and is not available as a public download.

The procedure is as follows:

1. Copy the file "ANI-1201HDUpdateFile.bin" to a USB flash disk.

2. Plug the USB flash disk into the USB port on the ANI-1201HD.

3. Pressing the button "HDMI" on the front panel for 6 seconds or sending RS-232 command 0698% for updating, then press the button "Ok"

on the remote or send RS-232 command 0609% to confirm update. The ANI-1201HD will capture the new firmware from USB flash disk.

4. After updating finish, reboot and send the command "0617%" to reset to factory settings.

5. After reset, reboot again.

System Diagram