A-Neuvideo ANI-QUAD Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy A-Neuvideo ANI-QUAD. A-Neuvideo ANI-QUAD 19 stron. 4x4 hdmi video wall processer & matrix switch

Drukuj stronę

REAR PANEL



HDMI IN 1~4:

Connect HDMI source signal such as STP, DVD player, Blue-ray player, or PC.



HDMI OUT 1~4:

Connect HDMI destination device such as a Monitor, Recorder, or distribution system.



Ethernet:

Connect to an active Ethernet network for telnet control (refer to section "RS-232 / telnet Commands")



USB SERVICE ONLY:



RS-232:

Used for remote control of the ANI-QUAD using RS-232 commands via a PC or other external controller.



DC 12V:

Plug the 12V DC power supply into the unit and connect the adaptor to an AC outlet.

PANEL DESCRIPTIONS

This slot is reserved for factory use and ﬁ rmware updates.