AEG TAB6L88EF Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zamrażarka AEG TAB6L88EF. AEG TAB6L88EF 36 stron.
Drukuj stronę4.5 Frostmatic function
The Frostmatic function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the
Frostmatic function at least 24 hours
before placing the food to complete pre-
freezing.
1. To activate this function press the Mode
button until the corresponding icon
appears.
The Frostmatic indicator flashes.
2. Press the OK button to confirm.
The Frostmatic indicator is shown.
This function stops automatically after 52
hours.
You can deactivate the Frostmatic function
before its automatic end by repeating the
procedure until the Frostmatic indicator turns
off or by selecting a different set temperature.
4.6 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat
the procedure until the ChildLock indicator
turns off.
4.7 DrinksChill function
The DrinksChill function is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires to
cool down food products for a certain period
of time.
It is also useful when a reminder is needed in
order not to forget the bottles or cans placed
in the freezer for fast cooling.
1. Press Mode until the corresponding icon
appears.
10
ENGLISH
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes)
for a few seconds.
2. Press the Timer regulator to change the
Timer set value from 1 to 90 minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min"
indicator flashes and an audible alarm
sounds. Press OK to switch off the sound and
terminate the function.
To switch off the function repeat the
procedure until the DrinksChill indicator turns
off.
It is possible to change the time at any
time during the countdown and at the end
by pressing the Temperature colder
button and the Temperature warmer
button.
4.8 High temperature alarm
When there is a temperature increase in the
freezer compartment (for example due to an
earlier power failure), the alarm and freezer
temperature indicators flash and the sound is
on.
To deactivate the alarm:
1. Press any button.
The sound switches off.
2. The freezer temperature indicator shows
the highest temperature reached for a few
seconds, then the display shows the set
temperature again.
The alarm indicator continues to flash
until the normal conditions are restored.
If you do not press any button, the sound
switches off automatically after around
one hour to avoid disturbing.
4.9 Door open alarm
If the freezer door is left open for
approximately 90 seconds, the sound is on
and alarm indicator flashes.
The alarm stops after closing the door. During
the alarm, the sound can be muted by
pressing any button.